Alarm Systems - MC - 02 Multi-function Remote Wireless Door Magnetic Announciator

Technical Parameters
Transmission frequency: 433.92MHz
Environmental humidity voer 90 percent
Working humidity: -10~60Deg.C
Sound pressure: about 130db
Door magnetic battery: AAA battery (1.5V) x 2 sections, shipped with battery.
Remote control battery: 1 CR2032 battery, shipped with battery
Remote weight: 15g
Host size: 90x43x13mm
Magnetic strip size: 45x13x13mm
Remote control size: 60x33x11mm
Remote control distance: greater than and equal to 15m (open space)
Door magnetic sensing range: greater than and equal to 15mm (no magnetic interference)
Door magnetic standby time: about 1 year
Remote standby time: more than 1 year
 
Multi-function door magnetic alarm use method
1, arming function:
Press and hold the arming button in the closed state, and the door magnet will emit an alarm sound for 1 second, indicating that it has entered the armed state. An alarm sounds for 30 seconds when the door and window are opened.
The door opening state cannot be armed. For example, when the arming button is pressed, the door magnet sends a rapid Di to close the door and stop for a maximum of 10 seconds.
2. Function mode:
In the disarmed state, press the function key to cycle through the three levels (mode 1 Dingdong) → (mode 2 alarm) → (mode 3 Di Di.
When mode 1Dingdong is selected, the door magnetic sounds Dingdong to indicate that it enters mode 1, and when the door is opened, the door magnet emits a Dingdong sound;
When mode 2 alarm is selected, the door magnetic field emits a rapid beep sound to enter mode 2, and when the door is opened, the door magnetic field emits an alarm sound until the door is closed;
When mode 3 DI sound is selected, the door magnet emits a sound to enter mode 3, and when the door is opened, the door magnet emits a beep, bang sound;
3. Emergency button (SOS):
Press the emergency button (SOS) in any state, the door will sound alarm for 30 seconds, alarm
Return to the previous state after stopping.
4, disarming keys:
Press the disarm button in any state to exit the current state and enter the disarmed state.
5, remote control learning and clear:
Press the learning button for 3 seconds to light up when the door is powered on. At this time, press any button on the remote control, and the door magnet will send sound to indicate successful learning;
Press and hold the learning button for 8 seconds to light up until it goes out, and the door will clear all remote controls.
6, low battery alarm:
When the voltage of the magnetic cell of the door is as low as 2.1V, the door magnet will emit a sound, and the battery should be replaced in time.